SATA disk

This page shows the model, size information and current status of the SATA disk. The following actions can be taken:

Field	Description
Format	Press the button to format the SATA disk. Warning: All data on the SATA disk will be erased if [Format] button has been pressed!
Examine disk	Press the button to check the SATA disk.
Bad block scan	Press the button to scan bad blocks for the SATA disk. If bad blocks are found, the number of bad blocks will be displayed in the Status field.

This page will automatically refresh every 5 seconds when one of the actions above has been taken.

USB disk

This page shows informations and current status of the selected USB disk. The following actions can be taken:

Field	Description
Eject	Press this button to safely unplug the selected USB disk.
Format	Press the button to format the selected USB disk. Warning: All data on the selected disk will be erased if [Format] button has been pressed!
Data sharing	Select this radio to use the selected USB disk as a network share.
QNAP Raid 1	Select this radio to configure the selected USB disk with the SATA disk as RAID 1 configuration.

This page will automatically refresh every 5 seconds when the selected disk is being formatted.

If you wish to change the disk usage please select the [Data sharing] or [QNAP Raid 1] and click the [Apply] button. The default setting of the disk usage is [Data sharing].

USB printer

This page shows the manufacture, model information and current status of the USB printer. The following actions can be taken:

Field	Description
Eject	Press this button to safely unplug the USB printer.
Clean up spool space	Press the button to clean up datas saved in the printer spool.

E-SATA disk

This page shows informations and current status of the selected E-SATA disk. The following actions can be taken:

Field	Description
Eject	Press this button to safely unplug the selected E-SATA disk.
Format	Press the button to format the selected E-SATA disk. Warning: All data on the selected disk will be erased if [Format] button has been pressed!
Data sharing	Select this radio to use the selected E-SATA disk as a network share.
QNAP Raid 1	Select this radio to configure the selected E-SATA disk with the SATA disk as RAID 1 configuration.

This page will automatically refresh every 5 seconds when the selected disk is being formatted.

If you wish to change the disk usage please select the [Data sharing] or [QNAP Raid 1] and click the [Apply] button. The default setting of the disk usage is [Data sharing].