SerialICE Controller
The SerialICE Monitor (on the SerialICE Controller) accepts commands from the
Host,
and issues commands to the Target via a
Driver.
SerialICE supports the following boards for use as a SerialICE Controller.
BDMR400x Evaluation Board
- Insert the four flash memories containing the SerialICE Monitor in U8,
U19, U29, and U40.
- Connect a serial cable from U28 to the host.
- Connect a null-modem serial cable from U43 to the
target.
Nitro (4010) Evaluation Board
- Insert the flash memory containing the SerialICE Monitor in U18.
- Connect a serial cable from J18 to the host.
- Connect a null-modem serial cable from J17 to the
target.
Navigation:
Document Home |
Document Contents |
Document Index