0x19	0x0003 // c00=11g USB mode, c03=11n mode
0x00	0x00bf // write reg 00
0x01	0x06e0
0x02	0x004c // temperature meter off
0x03	0x07f1 // RX IQ drive control and cml bias, 5f1
0x04	0x0975 // 100
0x05	0x0c58 // c00
0x06	0x0ae6
0x07	0x00ca // Z4 channel  1 setted
0x08	0x0e1c // RX LO drive bias, 200

0x00	0x00b7 // write reg 00, debug mode
0x0a	0x0850 // LNA ultra low gain
0x00	0x00bf // write reg 00, high speed mode

0x0b	0x01ba // mixer 10MHz and rssi high power
0x0c	0x0240
0x0e	0x0020

0x15	0x0f80 // DAC calibration off, f8f
0x16	0x0020 // write Rx ac-couple corner table 00 20KHz
0x17	0x0597
0x18	0x050a
0x1a	0x0e00 // turbo mode off
0x1b	0x0f5e // Z4 for 87B, tuning loop filter RS, f4e
0x1d	0x0607
0x1e	0x06cc

//Tx gain table is not necessary for Path B
0x0b	0x01ba //Rx LPF 1ba:10M 3ba:20M,  
0x23	0x0203 // 203, 343
0x24	0x0200 // 400

0x00	0x0037 // switch to reg0-reg15, and HSSI disable
0x04	0x0160 // CBC on, Tx Rx disable, High gain
0x16	0x0200 // write Rx ac-couple corner table 10
0x16	0x0380 // write Rx ac-couple corner table 11, mid to lo

0x16	0x0020 // write Rx ac-couple corner table 00 20KHz
0x16	0x01A0 // write Rx ac-couple corner table 01, mid to lo

0x0d    0x0ccc // for RX high power

0x00	0x00bf // switch to reg0-reg15, and HSSI enable
0x02	0x004d // temperature meter off
0x00	0x0cbf // switch to reg0-reg15, and HSSI enable
0x04	0x0975 // Rx mode
0x07	0x0700  //Channel-14

// write gain table to Zebra - ending
0xff 0xffff

