NetWare 5.1

Installation:
-------------
Follow this sequence for installation under NETWARE.
 
 1. Install the NIC into a PCI slot of a NetWare server and note the slot 
    number for driver configuration later (slots are generally numbered 
    top/front to bottom/back of the machine). It is recommended that 
    NetWare 5.1 with Support Pack 1 or later be installed. To install the 
    driver,copy the GNC01T.LAN & GNC01T.LDI files onto a floppy disk.
    
 2. Load NWConfig.nlm and follow the 'Driver Options->Configure Network 
    drivers->Select a driver' options on the UI. Follow on-screen 
    directions to point to the drivers installed on floppy (A:\NETWARE).
    Put the slot number and the number of Tx,and Rx Descriptors as 
    required.
    
 3. Alternately, driver can be loaded from the command line (e.g.
    load A:\NETWARE\GNC01T.LAN)& passing the required parameters. This will 
    also display the available slot options for the NIC.
    
 4. The GNC01T.LAN may also be configured at OS install time and can be 
    used in conjunction with the auto-detect feature on NetWare Install.
    
 5. The different options for speed and duplex mode can be configured using 
    NWConfig at installation time or Inetcfg later.
    