PCMCIA 10/100 Fast Ethernet + 56K Fax/Modem PC Card

                      Installation for Microsoft Windows 98

  Contents
  
       Introduction
       Getting Started
       Troubleshooting
       Support Options
       Copyrights, Trademarks, and Disclaimers

  Introduction
  
       Windows 98 provides a complete "Plug n' Play" System that will
       automatically recognize and configure most PC Cards.

       Before inserting your LanModem PC Card, the system's PCMCIA chipset
       must be enabled and functioning. The PCMCIA chipset is responsible
       for controlling the systems interface for PC Cards. Please consult
       the system's manual or manufacture for use with Windows 98.

       Multifunction PC Cards put a heavy demand on a system's resources.
       Please resolve all system conflicts, errors, and Windows 98 issues
       before installing the LanModem.

       Please have the installation media for the Windows 98 ready for
       any request for files.

  Getting Started
  
       With the system off, remove all PC Cards

       Start/Boot Windows 98

       Insert the LanModem into one of the system's PCMCIA Slots

       A "New Hardware Found" dialog box should appear, see
        troubleshooting if the dialog box doesn't appear.

       Select "Driver from disk provided by hardware manufacturer"

       Insert the LanModem driver disk in drive A:

       Type in the path name A:\

       Because the device is multifunction, the system will repeat
        the "New Hardware Found" a few times. Please repeat the same
        steps for each request made by the system.

       The Window 98 PCMCIA installation will add Netware and Microsoft
        network support automatically. Any network support can be adjusted
        by the Network Support in the Control Panel.

  Troubleshooting
  
       If the "New Hardware Found" dialog box doesn't appear.
             -Run REGEDIT
             -Select "HKEY_LOCAL_MACHINE"
             -Select "Enum"
             -Select "PCMCIA"
             -Highlight the folder "PCMCIAs-Fast_Ethernet+56K_ComboCard-XXXX"
             -Press the <Delete> key to delete the association

  Support Options
  
       We are consistently improving and upgrading our drivers. you are
       welcomed at any time to browse through our BBS, and download any
       drivers, utilities and help files.

       If you still cannot get the LanModem working properly, our
       technical experts are always ready to help.  Please be at your
       computer, have your LanModem, Drivers Disk, and the following
       information available:

       * Version number of any drivers you are running
       * The extact text of any error message displayed on your screen
       * The type of computer
       * The type of network

  Copyrights, Trademarks, and Disclaimers
  
  All references to MS, Windows, Win98, Windows 98, Windows NT, WinNT
  are rights reserved by Microsoft Corporation

  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are
  rights reserved by Novell Corporation

  Further rights reserved to their respective corporations


